JY-JSS Polymer Cement Waterproof Coating

• Versatile Construction on Various Substrates: Can be directly applied on both damp and dry bases of multiple materials. It won’t flow on vertical surfaces, supporting flexible application scenarios. Suitable for roll coating or brush coating, meeting different construction preferences.​

• Superior Coating Performance: Boasts high coating strength and large elongation, forming a strong, tough film. Exceptional water resistance, weather resistance, and long-term durability ensure long-lasting waterproof protection.​

• Customizable Appearance & Eco-Friendly: Pigments can be added to create colored coatings, adding aesthetic value to projects. As a water-based coating, it is non-toxic, odorless, and pollution-free—aligning with green, safe, and environmentally friendly standards, perfect for eco-conscious builds.​

• Easy & Efficient Construction: Simple operation shortens construction periods significantly. Enables construction on damp substrates with firm bonding, reducing pre-treatment steps and improving work efficiency.​

• Breathable & Anti-Bubbling: Features breathable and impermeable properties. Even if the base is damp, the coating allows moisture to escape without causing blistering of the waterproof layer, maintaining structural integrity.

Application Scope

The JY-JSS Polymer Cement Waterproof Coating is a versatile, high-performance solution designed for a wide range of waterproofing applications. It can be applied on wet or dry substrates, including masonry, mortar, concrete, metal, wood, rigid plastics, glass, gypsum board, foam board, asphalt, rubber, SBS membranes, APP membranes, polyurethane, and more. This makes it ideal for both industrial and civil engineering projects on new or existing structures.

Key application areas include:

• Buildings and Structures: Houses, walls, basements, tunnels, bridges, pools, reservoirs, bathrooms, and kitchens.
• Indoor Waterproofing: Suitable for waterproofing projects in indoor toilets, bathrooms, kitchens, balconies, floors, and underfloor heating systems in buildings.
• Roofing: Can be used as one of the multiple waterproof measures for non-exposed roofs, providing reliable protection against moisture infiltration.

This coating ensures durable, flexible waterproofing in diverse environments, enhancing structural integrity and longevity while being easy to apply on various surfaces.

Performance index

Construction Process of JY-JSS Polymer Cement Waterproof Coating

1. Base Layer Treatment

• The substrate surface must be flat, solid, clean, and free of sharp objects, dust, standing water, oil stains, or other contaminants.
• All internal and external corners, as well as pipe roots, must be formed into smooth arcs: internal corners with a radius ≥25mm, external corners with a radius ≥5mm.
• Uneven areas and cracks must be leveled first; leaking areas must be sealed prior to coating application.

2. Mixing Ratio and Material Preparation

• Type I Product: Liquid : Powder = 10 : 8 (by mass).
• Type II Product: Liquid : Powder = 10 : 12 (by mass).
• If water is required, add it to the liquid material first (within 15% of the liquid quantity). Gradually add the powder while stirring continuously with a mechanical mixer for at least 5 minutes until the mixture is uniform and free of lumps.
• The prepared coating must be used within 2 hours. Do not add water after initial mixing, as increased viscosity will affect workability.
• Adjust water addition slightly to control viscosity for vertical or horizontal surface application, following the mixing ratios indicated on the product packaging.

3. Detailed Additional Waterproof Layer

• Fill grooves with sealing material where necessary.
• Apply multiple coatings (2–4 layers) at critical areas such as internal/external corners, pipe roots, and drainage outlets.
• For underground projects, reinforce with one layer of base fabric (fetal reinforcement material). The fabric must be laid flat, without wrinkles, with overlaps of at least 100mm. Apply one coat of coating before laying the fabric, then brush another coat over it after placement.

4. Large-Area Waterproof Layer Construction

• Apply the coating in multiple thin layers—typically 4 layers; up to 5 layers for special projects.
• Allow approximately 8 hours between layers (extend in winter). The first layer should be thin (0.2–0.3mm); subsequent layers 0.4–0.5mm each.
• Reference Dosage: When the total waterproof layer thickness is 1.0mm, consumption is approximately 2.0–2.2 kg/m² (actual usage depends on substrate condition and final thickness).
• Construction Thickness: Minimum 1.5mm for horizontal surfaces; minimum 1.2mm for vertical surfaces. Avoid thick single-layer application to prevent cracking.
• For vertical surfaces, use little or no water to prevent sagging, ensuring design thickness is achieved and avoiding material buildup at corners that may lead to cracking.
• After completion and quality acceptance, protect the finished waterproof layer from damage.

5. Key Construction Notes

• Temperature: Construction should be carried out at 5°C–35°C. No application in rainy or snowy weather.
• Sequence: Base treatment → Detailed additional waterproofing → Large-area coating → Quality inspection and acceptance → Protective isolation layer.
• Quality Control: Ensure full penetration of the coating into the reinforcement fabric without wrinkles or edge curling. Final protection measures must be implemented post-acceptance.

Precautions

• Construction is prohibited below 0°C or in rainy/snowy conditions. Outdoor work is not allowed, but indoor projects may proceed with proper insulation.
• Use materials as allocated. Once liquid and powder are mixed, do not add water.
• For colored coatings, ensure all materials are from the same batch and within the expiration date.
• Apply the next coat only after the previous one is dry to the touch and non-tacky. Adjacent coats should be brushed in perpendicular directions.

Packaging, Transportation, and Storage

• Liquid is packed in plastic drums; powder is packed in plastic-lined woven bags.
• During transport, protect from rain and impact to keep packaging intact.
• Store liquid at above 5°C; keep powder in a cool, dry place.
• Shelf life is 6 months in unopened, undamaged packaging. Material may be used after passing re-inspection if stored beyond this period.

Customer Reviews

Maria S. – Homeowner, Lisbon, Portugal “We used JY-JSS for our old basement walls, which had constant damp issues. The coating went on smoothly over the concrete after minor prep, and we applied three layers as suggested. Six months in, no moisture spots, and it’s held up well through a rainy winter. Easy to work with for DIY.”

Ahmed R. – Contractor, Dubai, UAE “Applied this on a rooftop water tank base in a commercial project. The surface was dry concrete, and we added a reinforcement mesh at the corners. Two coats reached 1.5 mm, and the material didn’t sag on vertical edges. Curing was consistent in 35°C heat. No leaks after three months of testing.”

Lars K. – Facility Manager, Copenhagen, Denmark “Used it in a below-grade parking garage retrofit. The substrate had some residual moisture, but the product still adhered well after surface cleaning. We followed the 8-hour interlayer timing, and the final thickness met the 1.5 mm spec. No blistering or peeling after one year of service.”

Sophie L. – Renovation Specialist, Vancouver, Canada “Chose JY-JSS for bathroom and balcony under-tile waterproofing in a condo project. Mixed Type II with minimal water for vertical application—good consistency, no dripping. Tiled directly after full cure. Ten units done, zero callbacks for leaks in eight months.”

Rajesh P. – Engineer, Mumbai, India “Tested it on a bridge abutment repair alongside other JS coatings. Adhesion to old concrete was solid after priming. Applied four layers in humid conditions (28°C, 70% RH). Thickness checked with a gauge—average 1.6 mm. No cracking observed after monsoon exposure.”

Case Studies

To demonstrate JY-JSS's practical use, here are a few documented examples from completed projects:

• Residential Basement in Texas, USA (2024): A 400 m² basement with groundwater issues was coated with JY-JSS Type II. Three layers were applied with fabric reinforcement. After 10 months, no moisture penetration was observed, even during floods, maintaining a dry interior.
• Commercial Kitchen in Beijing, China (2023): In a restaurant kitchen prone to spills, JY-JSS was used on 800 m² of floors and walls. The quick-drying layers allowed minimal downtime. Inspections after 15 months showed no mold or degradation.
• Bridge Deck in France (2024): A 600 m² bridge surface required waterproofing to prevent corrosion. JY-JSS Type III was brushed on in four layers. It has endured traffic and weather, with checks confirming strong adhesion and no cracks.

Frequently Asked Questions (FAQ)

Here are answers to some common questions from customers about JY-JSS Polymer Cement Waterproof Coating:

• What surfaces is JY-JSS suitable for? JY-JSS can be applied to concrete, masonry, mortar, metal, wood, gypsum board, asphalt, rubber, and various membranes. It works on both damp and dry substrates but requires a clean, solid base.
• How do I mix the components? Mix liquid and powder in the ratio 10:8 (Type I) or 10:12 (Type II) by mass. Add water to the liquid first if needed (up to 15%), then stir in powder mechanically for 5 minutes until lump-free. Use within 2 hours.
• How many layers are typically needed? Apply 3-5 thin layers for large areas, with 2-4 layers at detailed spots. Total thickness should be at least 1.5mm on horizontal surfaces and 1.2mm on vertical ones to ensure proper waterproofing.
• What is the drying time between layers? Allow about 8 hours between layers under normal conditions (20-25°C, moderate humidity). Extend this in cooler or humid weather. The surface should be dry to touch before the next coat.
• Is JY-JSS safe for indoor applications? Yes, it's water-based, non-toxic, and odorless with low VOCs. Use in well-ventilated areas during application, and wear protective gear like gloves and masks.
• How long does the waterproofing last? With proper application, JY-JSS can provide effective waterproofing for 5-10 years, depending on exposure to UV, chemicals, and mechanical stress. Regular maintenance checks are advised.
• Can it be applied in cold or wet weather? Apply only between 5-35°C and in dry conditions. Avoid rain, snow, or temperatures below 0°C, as they can affect mixing and curing. Indoor use is possible with temperature control.
• Do I need reinforcement fabric? Fabric is recommended for underground or high-stress areas to enhance durability. Embed it between coats, ensuring it's flat with overlaps of at least 100mm.
• How should I store the product? Store liquid above 5°C and powder in a cool, dry place away from moisture. Shelf life is 6 months in unopened packaging; inspect before use if stored longer.

About Great Ocean Waterproof

Great Ocean Waterproof (formerly Weifang Juyang New Waterproof Materials Co., Ltd.), established in 1999, is a leading high-tech waterproofing enterprise integrating R&D, production, and sales. Headquartered in Taitou Town, Shouguang City—the heart of China’s largest waterproof materials production base—our 26,000㎡ state-of-the-art facility is equipped with multiple advanced production lines for waterproof membranes, sheets, and coatings.

Our extensive product portfolio includes:

• Polymer Membranes: Polyethylene-Polypropylene (Polyester) Waterproof Membrane, PVC Waterproof Membrane, TPO Waterproof Membrane, CPE Waterproof Membrane for High-Speed Railways, Self-Adhesive Polymer Reinforced Membrane, Non-Asphalt Reactive Pre-Laid Polymer Self-Adhesive Membrane, Strong Cross-Laminated Reactive Bonding Membrane
• Root-Resistant Solutions: Modified Bitumen Root-Resistant Membrane, Metal-Faced Polymer Root-Resistant Membrane, Root-Resistant PE/PP (Polyester) Membrane, Root-Resistant PVC Membrane
• Asphalt-Based Products: SBS/APP Modified Bitumen Waterproofing Membrane, Self-Adhesive Bitumen Membrane
• Coatings: Single/Double-Component Polyurethane Waterproof Coating, Polymer Cement (JS) Composite Waterproof Coating, Water-Based (951) Polyurethane Coating, Cementitious Crystalline Waterproofing Coating, Spray-Applied Instant-Set Rubber Asphalt Coating, Non-Curing Rubber Asphalt Coating, High-Elastic Liquid Membrane Coating, Transparent Exterior Wall Waterproof Gel
• Auxiliary Materials: PE/PP Dedicated Dry Powder Adhesive, Protective Drainage Boards, Self-Adhesive Asphalt Tape, Butyl Rubber Tape

Backed by a strong technical team, cutting-edge equipment, and comprehensive testing capabilities, we ensure consistent, reliable quality. Certified by national authorities, we have earned:

• National Ministry of Agriculture: “Total Quality Management Compliance”
• China Quality Inspection Association: “Nationally Certified Quality Product”
• Shandong Province: Industrial Construction Product Registration & Production License